HOME /
Free Measurement Service
Model No. FMS01
FREE sample testing!
Give us your sample, and we will measure its
permittivity/loss tangent and permeability.
Who wants to pay for imperfect data? Nobody. And KEYCOM knows that.
That’s why we offer material measurement and data verification before you
decide to purchase.
Please read the following special conditions which are not applicable to
our ordinary service.
That’s why we offer material measurement and data verification before you
decide to purchase.
Please read the following special conditions which are not applicable to
our ordinary service.
Important note 1
Frequency range: Permittivity/Loss tangent 1 KHz to 67 GHz
Permeability 1 MHz to 10 GHz
Sample size: min. 3 mm x 3 mm; thickness 20 µm to 2 mm (or inquire)
Temperature: Room temperature
Frequency range: Permittivity/Loss tangent 1 KHz to 67 GHz
Permeability 1 MHz to 10 GHz
Sample size: min. 3 mm x 3 mm; thickness 20 µm to 2 mm (or inquire)
Temperature: Room temperature
Important note 2
Samples must be received at KEYCOM Japan by June 30, 2014.
Only the first 30 samples to arrive will be tested.
Max. 2 samples per applicant.
Samples must be received at KEYCOM Japan by June 30, 2014.
Only the first 30 samples to arrive will be tested.
Max. 2 samples per applicant.
Important note 3
The report of measurement will be returned to the applicant by e-mail.
Your sample will be destroyed during testing.
Samples cannot be returned.
KEYCOM will not enter into a nondisclosure agreement for this offer.
KEYCOM is not responsible for any use of the measurement results.
The report of measurement will be returned to the applicant by e-mail.
Your sample will be destroyed during testing.
Samples cannot be returned.
KEYCOM will not enter into a nondisclosure agreement for this offer.
KEYCOM is not responsible for any use of the measurement results.
Are you coming to Tampa for IMS 2014?
Bring your sample to our booth! KEYCOM will be in booth 1553.
We will measure it on the spot with our DPS17 and Agilent LCR E4980A.
(Sample must be over 50 µm thick.)
Bring your sample to our booth! KEYCOM will be in booth 1553.
We will measure it on the spot with our DPS17 and Agilent LCR E4980A.
(Sample must be over 50 µm thick.)