KEYCOM provides solutions in the 300 GHz to 1 μHz frequency range (SHF/EHF/MW/UHF/VHF/ULF).
We undertake designing, manufacturing and measuring. Please feel free to contact us.

Clean cable

Catalog No.ccb

KEYCOM develops Robot cables that are of high quality in a bending characteristic to satisfy customer's need and application.
And KEYCOM provides the best products suitable for applications while considering a static friction coefficient if necessary.
Clean type cables which are dust-free are also available upon customer's requests.

Contents

Clean type Heat-resistant Wire (Cable) for Robot
ccb01
It is a long flex life, available to the moving parts.
The continuous use temperature of it is very high with 260 degrees.
It is a cable of a clean type that the generation of dust and the gas is extremely little in the vacuum.
 
Clean robot cable, for high voltage
ccb06
It is a long flex life.
It is a cable of high voltage type that the generation of dust and the gas is extremely little in the vacuum.
The continuous use temperature of it is very high .
 
Clean robot cable, Coaxial type for high voltage
ccb05

 

It is a long flex life.
It is a cable of a coaxial type that the generation of dust and the gas is extremely little in the vacuum.
The continuous use temperature of it is very high .
 
1 pair shielded clean cable for robot
ccb04

It is one pair shielded clean cable for robot.
･The generation of the gas of it is extremely little.
･No dust from the cable sheath or terminals can be recognized.
･It is a long flex life, available to the moving parts.
･Press-in terminals can be used.
Continuous use temperature : -250 degree ~ +200 degree
Standard article length : 100m ( The shortest length is 20m or more, Cutting is two places or less )

 
Robot cables with 6 pair shielded
rbl01
This is a robot cable with 6 pair shields.
＊ A long bending life.
＊ After 5 million times of a bending test that bends a 180 degree back and forth at a bending radius of 30 mm.
- No increase of conductor resistance can be recognized.
- No scratches can be found.
- No scratches and tears of conductors and insulators can be recognized at the disassembled cables.
* No dust from the cable sheath or terminals can be recognized.
- It is best suitable for clean room movable operation.
- Press-in terminals can be used.