KEYCOM provides solutions in the 300 GHz to 1 μHz frequency range (SHF/EHF/MW/UHF/VHF/ULF).
We undertake designing, manufacturing and measuring. Please feel free to contact us.

Products for Vacuums Environments

Model No. XBC

1.  Clean Cables

KEYCOM develops dust-free, clean cables based on its outstanding robot cable technologies that are of high quality in a bending characteristic to satisfy customer's needs and applications.
KEYCOM can flexibly reflect customers’ individual request such as FCC complaint cables or electromagnetic noise resistant cables, taking advantage of accumulated knowledge and expertise on noise-resistant cables and connectors.

1.1.  Clean, Heat-Resistant Wires (Cables) for Robot [CCB01] 1.2.  Clean Robot Cable for High Voltage [CCB06]
 

Clean wires (cables) with long bending tolerant lives, applicable to moving parts.
Its continuous operating temperature is as high as 260°C, and it generates little dust or gas in a vacuum.
 
A clean robot cable for high voltage with a long bending tolerant life and little gas generation in a vacuum.
Continuous operating temperature is as high as 200°C.

 

1.3.  Coaxial Clean Robot Cable for High Voltage [CCB05] 1.4.  6 Pair Shielded Clean Cable [CCB02]
 

A coaxial clean robot cable for high voltage with a long bending tolerant life and little gas generation in a vaccume.
 

6 pair shielded clean cable with a long bending tolerant life.
* Makes little dust from the outer jacket or the ends.
* Suitable for movable applications in a clean room.
* Crimped terminal applicable.
*After 5 million sets of a bending test, a set consisting of
bending the cable back and forth 180°each at a bending radius of 30mm,
- No increase in conductor resistance was acknowledged.
- No damage was found on the jacket.
- No damage was found on the conductor or insulator.

2.  High-Power Coaxial Cable Assembly for Vacuum

2.1.  High-Power Coaxial Cable Assembly for Vacuum [vcc01]
 

Coaxial cable assembly for high power microwave applications in vacuum. It features high heat cycle resistance and leak tightness.
The lower connector area is designed to withstand high temperatures of 150°C.

3.  Parts for vacuum / Hermetic Seal Adapters

3.1.  Parts for vacuum / Hermetic Seal Adapters [upj23]
 

Hermetic seal adapters designed to secure high vacuum.
Please contact us for you specific customization request.